Skip to main content
Sustainable Chemical Processes
Download PDF
Download ePub

Nano Cu-catalyzed efficient and selective reduction of nitroarenes under combined microwave and ultrasound irradiation

Sustainable Chemical Processes volume 2, Article number: 14 (2014) Cite this article

Abstract

In situ preparation of copper nanoparticles from a copper acetate precursor and its application as an efficient catalyst for the selective reduction of aromatic nitro compounds with hydrazine hydrate under combined microwave and ultrasound irradiation were described in detail. The results reveal the synergetic effect of microwave and ultrasound on the synthesis of copper nanoparticles, and formation of various amino derivatives.

Introduction

From the viewpoint of environmentally benign and sustainable chemistry, there has been an increasing interest in the search for more sustainable chemical processes during the last decade [1, 2]. Based on this context, the use of efficient synthetic method, nontoxic chemicals, and benign solvents, is the most valuable feature for the design of a “ideal” chemical protocol. Recently, microwave (MW) and ultrasound (US) technologies have been widely adopted as important synthetic methods in modern organic chemistry, owing to the fact that these technologies can usually reduce the reaction time, minimize energy consumption and in certain cases, increase the yield and selectivity of product [3–6].

Catalytic reduction of aromatic nitro compounds remains appealing because it is widely employed in numerous syntheses of intermediates and final products throughout the dyes, agricultural chemicals, pharmaceuticals and materials both in the laboratory and in industry [7–9]. Although many synthetic routes have been reported for the preparation of anilines from the corresponding aromatic nitro compounds [10–14], there is still necessary for the development of cost-effective catalysts with high activity in particular Fe- [15] and Cu-catalyzed [16] protocol. Recently, much attention has been attracted to the metal nanoparticles catalysts which have revealed high catalytic activities that far exceed those of conventional homogeneous catalysts, owing to their extremely small dimensions and huge special surface [17, 18]. A few procedures involving hydrogenation of nitrobenzene into aniline catalyzed by metal Pt [19–22], Ru [23], Au [24–26] and Rh [27] nanoparticles have been demonstrated. Pal et al. obtained amino derivatives by the reduction of aromatic nitro compounds with NaBH4 catalyzed by coinage of metal nanoparticles (Cu/Ag/Au) [28]. Wen et al. studied the catalytic transfer hydrogenation of aromatic nitro compounds in presence of polymer-supported nano-amorphous Ni-B catalyst [29]. Among the pioneering works of Cu nanoparticles [30–34] emerged as a promising catalyst for organic synthesis, Saha and Ranu [35] reported the reduction of nitro-compounds catalyzed by nano copper particles, however, synthesis required high stoichiometric ratio of copper nanoparticles (3 equiv.) and excess reductant (5 equiv.) to nitro-compounds, long reaction time (8–12 hours) and argon protection.

As our continuing efforts on microwave and ultrasound-assisted reaction [36–40], we found that combined microwave and ultrasound irradiation (CMUI) could strongly promote the nano Cu-catalyzed reduction of aromatic nitro compounds due to its simultaneous enhancement on heat and mass transfer. High reaction rate, low dosage of catalyst and excellent yields were achieved via a chemoselective reduction of aromatic nitro compounds with hydrazine hydrate under CMUI.

Results and discussion

As stated in the literature [41, 42], the initial copper nanoparticles were generated via a reduction of copper acetate (1 mmol) with hydrazine hydrate (2 equiv) in ethylene glycol (8 mL) under combined irradiation of MW: 100 W maximum power and US: 50 W at 120–125°C for 5 min. Characterization of the copper nanoparticles were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). All the peaks on the XRD pattern can be readily indexed to pure copper (JCPDS file No. 04–0836) as shown in Figure 1(a). TEM image of the catalyst exhibited that the spherical nanoparticles dispersed very well (Figure 1(b)). The Cu nanoparticles were then employed to catalyze the reduction of 1a with hydrazine hydrate. The desired product aniline 2a was obtained in 89% yield in 3.5 minutes under CMUI (Figure 2, entry 1). Encouraged by this result, we then investigated the possibility of reducing nitrobenzene with hydrazine hydrate using Cu(OAc)2 as a catalyst precursor under CMUI. 97% yield of 2a was formed (Figure 2, entry 2), and Cu nanoparticles were obtained by centrifuging and washing with ethanol. Nevertheless, the yield of 2a greatly reduced to 72% applying this reused Cu nanoparticle catalyst (Figure 2, entry 3). The activity decrease of catalyst was owing to the agglomeration and increase of particle size after reuse (Figure 3). This two-step domino reaction would involve an in situ preparation of nano Cu catalyst followed by reduction of nitrobenzene. We subsequently examined various solvents under CMUI in the presence of 50 mol% Cu(OAc)2 (Figure 2, entries 4–7). None of the solvents other than ethylene glycol could give a satisfactory. This is mainly due to the fact that the reduction of simple copper salts usually tend to stop at the Cu2O stage in the presence of a number of oxygenous water without protective agents, the di-OH group of ethylene glycol is probable a stabilizer of Cu2+ in aqueous and prevents the agglomeration and growth of nanoparticles [43]. Among the concentration of Cu(OAc)2 (Figure 2, entries 8–10) and hydrazine hydrate (Figure 2, entries 11–13) tested, 20 mol% Cu(OAc)2 and 3 equiv. hydrazine hydrate seemed to be the most efficient condition for this reaction. A lower reaction temperature of 105–110°C with relatively longer reaction time reduced the yield of the amine 2a to 73% (Figure 2, entries 14), while increasing the temperature to 130–135°C also resulted in a decreased yield of 85% (Figure 2, entry 15).

Figure 1
figure 1

XRD pattern (a) and TEM images (b) of Cu nanoparticles.

Full size image
Figure 2
figure 2

Optimization of the conditions a .

Full size image
Figure 3
figure 3

TEM images of reused Cu nanoparticles.

Full size image

Having optimized the conditions in hand (Figure 2, entry 12), we next evaluated the scope of the procedure by varying aromatic nitro compounds. The results shown in Figure 4 indicated that all reactions proceeded very smoothly (yields: 89–99%) and quickly (shorter than 6.5 min) under CMUI. Both electron-rich and electron-deficient aromatic nitro compounds 1 provided the desired product 2 in good yields. Substantial steric hindrance to the reduction was tolerated (Figure 4, entries 2, 5 and 10). Moreover, it is noteworthy that the dehalogenation was successfully avoided during the progress of the catalytic reduction of aromatic nitro compounds to the corresponding anilines under reaction conditions (Figure 4, entries 6–10) [44]. The chemoselective reduction was also observed in the case of m-dinitrobenzene (Figure 4, entry 11), where one nitro group remained intact. The extremely efficient dielectric heating along with intensive mass transfer in heterogeneous systems resulted in dramatic reaction rate enhancement, and the highly catalytic activity of in situ preparation of nano Cu made the reduction reaction more efficient with lower amount of catalyst (20 mol%) and hydrogen source (3 equiv.).

Figure 4
figure 4

CMUI-assisted nano Cu-catalysed aromatic nitro reduction a .

Full size image

To investigate the action of CMUI, we evaluated the reduction of nitrobenzene 1a with hydrazine hydrate in the present of pre-catalyst Cu(OAc)2 under conventional conditions. Only 52% yield of aniline was obtained after 12 hours at 120°C (Table 1, entry 2). Moreover, a lower yield was obtained when using either MW or US irradiation (Table 1, entries 3, 4). The viability of commercial metallic Cu powder as a catalyst in the reduction of nitrobenzene under CMUI (Table 1, entry 5) was also examined. Previous described enhancement of CMUI on heterogeneous system, as well as the activation of nano-size catalysts were clearly demonstrated herein.

Table 1 Reduction of nitrobenzene using different methods a
Full size table

The proposed reaction mechanism of this reduction process is shown in Scheme 1. Firstly, Cu(OAc)2 is reduced by hydrazine hydrate to provide activated copper nanoparticles which would react with another hydrazine hydrate resulting in the formation of CuH. This further proceeds to generate Cu and hydrogen by the thermal decomposition under the CMUI. Then the nitro compound is reduced to a nitroso compound which follows to provide the hydroxylamine and finally gives rise to amine via a hydrogenation process [45].

Scheme 1
scheme 1

Proposed reaction mechanism

Proposed reaction mechanism.

Full size image

Conclusions

In conclusion, we have presented an efficient and convenient method for the chemoselective reduction of aromatic nitro compounds catalyzed by in situ prepared Cu nanoparticles under combined microwave and ultrasound irradiation. It allowed us to achieve wide range of anilines bearing both electron-donating and electron-withdrawing substituents in excellent yields. The intriguing results presented herein might open a promising new approach for the efficient preparation and application of nanoparticles.

Experimental

All solvents and reagents were purchased from commercial sources and were used without prior purification. All combined microwave and ultrasound irradiation experiments were carried out in a apparatus (a professional TCMC–102 microwave apparatus (Nanjing Lingjiang Technological Development Company, China), operating at a frequency of 2.45 GHz with continuous irradiation power from 0 to 500 W, and a FS–250 professional ultrasound apparatus (Shanghai S. X. Ultrasonics, China), operating at a frequency of 20 KHz with controllable irradiation power from 10 to 100 W. The reactions were carried out in 15 mL two-necked Pyrex flask, placed in the microwave cavity and the tip of detachable horn should be immersed just under the liquid surface. TLC analysis was performed on aluminum backed plates SIL G/UV254. The products were purified by column chromatography and were identified by 1H NMR, 13C NMR spectra recorded on 400 MHz Bruker NMR instrument and GC–MS.

General experimental procedure for the peduction of nitroarenes

A mixture of nitro compounds (1 mmol), copper acetate (0.2 mmol), hydrazine hydrate (3 mmol) and ethylene glycol (4 mL) was subjected to microwave-ultrasound activation condition. Then hydrazine hydrate (3 mmol) in ethylene glycol (2 mL) was added and the ultrasound and microwave source are switched on successively (power level: US 50 W, MW 100 W maximum power). The mixture was irradiated simultaneously by microwaves and ultrasound until nearly complete conversion of aromatic nitro compounds. The progress of the reactions was monitored by TLC and GC–MS. The reaction mixture was then subjected to centrifugation. After decanting the liquid, the Cu nanoparticles were washed with ethanol (5 mL, three times), which was combined with the decantate. Water (10 mL) was added to the centrifugal liquid, and the product was extracted into ethyl acetate. Evaporation of solvent and the crude product was purified by column chromatography over silica gel (ethyl acetate/petroleum ether = 1:9–1:6) to afford the products.

Aniline (2a)

1H NMR (400 MHz, CDCl3): δ 7.34 (t, J = 7.5 Hz, 2H), 6.95 (d, J = 7.4 Hz, 1H), 6.80 (dd, J = 8.4, 0.8 Hz, 2H), 3.69 (s, 2H). 13C NMR (101 MHz, CDCl3): δ 146.78, 129.49, 118.60, 115.33. MS (GC-MS): 93 (M+)

o-toluidine (2b)

1H NMR (400 MHz, CDCl3): δ 7.25 (t, J = 7.0 Hz, 2H), 7.25 (t, J = 7.0 Hz, 2H), 6.93 (t, J = 7.4 Hz, 1H), 6.93 (t, J = 7.4 Hz, 1H), 6.87–6.77 (m, 1H), 6.86–6.78 (m, 1H), 3.67 (s, 2H), 3.67 (s, 2H), 2.33 (s, 3H), 2.33 (s, 3H). 13C NMR (101 MHz, CDCl3): δ 144.89, 130.64, 127.16, 122.48, 118.73, 115.13, 17.50. MS (GC-MS): 107 (M+)

m-toluidine (2c)

1H NMR (400 MHz, CDCl3): δ 7.36–7.18 (m, 1H), 6.78 (dd, J = 16.7, 7.8 Hz, 1H), 6.64 (ddd, J = 21.0, 11.0, 10.1 Hz, 2H), 3.73 (s, 2H), 2.43 (d, J = 34.7 Hz, 3H). 13C NMR (101 MHz, CDCl3): δ146.77, 139.21, 129.36, 119.52, 116.16, 112.50, 21.64. MS (GC-MS): 107 (M+)

p-toluidine (2d)

1H NMR (400 MHz, CDCl3): δ 7.01 (d, J = 8.0 Hz, 2H), 6.69–6.62 (m, 2H), 3.49 (s, 1H), 2.29 (s, 2H). 13C NMR (101 MHz, CDCl3): δ 143.82, 129.77, 127.80, 115.29, 20.47. MS (GC-MS): 107 (M+)

2-aminophenol (2e)

1H NMR (400 MHz, DMSO-d6): δ 8.93 (s, 1H), 6.63 (dd, J = 7.7, 1.3 Hz, 1H), 6.55 (dtd, J = 9.1, 7.7, 1.6 Hz, 2H), 6.45–6.32 (m, 1H), 4.46 (s, 2H). 13C NMR (101 MHz, DMSO-d6): δ 143.93, 136.49, 119.46, 116.38, 114.39, 114.31. MS (GC-MS): 109 (M+)

3-chlorobenzenamine (2f)

1H NMR (400 MHz, CDCl3): δ 7.11 (t, J = 8.0 Hz, 1H), 6.86–6.74 (m, 1H), 6.69 (t, J = 2.1 Hz, 1H), 6.56 (ddd, J = 8.1, 2.2, 0.8 Hz, 1H), 3.71 (s, 2H). 13C NMR (101 MHz, CDCl3): δ 147.86, 134.79, 130.46, 118.41, 114.98, 113.39. MS (GC-MS): 127 (M+)

4-chlorobenzenamine (2g)

1H NMR (400 MHz, CDCl3): δ 7.17–7.08 (m, 2H), 6.68–6.57 (m, 2H), 3.57 (s, 2H).

13C NMR (101 MHz, CDCl3): δ 145.00, 129.12, 123.11, 116.26. MS (GC-MS): 127 (M+)

3-bromobenzenamine (2h)

1H NMR (400 MHz, CDCl3): δ 7.05 (t, J = 8.0 Hz, 1H), 6.93 (ddd, J = 7.9, 1.7, 0.9 Hz, 1H), 6.85 (t, J = 2.0 Hz, 1H), 6.60 (ddd, J = 8.0, 2.2, 0.9 Hz, 1H), 3.73 (s, 2H). 13C NMR (101 MHz, CDCl3): δ 148.06, 130.80, 123.08, 121.31, 117.86, 113.84. MS (GC-MS): 170 (M+)

4-fluorobenzenamine (2i)

1H NMR (400MHz, CDCl3): δ 6.99–6.80 (m, 2H), 6.69–6.55 (m, 2H), 3.56 (s, 2H). 13C NMR (101MHz, CDCl3): δ 157.54, 155.21, 142.70, 142.68, 116.15, 116.08, 115.77, 115.55. MS (GC-MS): 111(M+)

2,5-dichlorobenzenamine (2j)

1H NMR (400 MHz, CDCl3): δ 7.17 (d, J = 8.5Hz, 1H), 6.77 (d, J = 2.3 Hz, 1H), 6.68 (dd, J = 8.5, 2.4 Hz, 1H), 4.08 (s, 2H). 13C NMR (101 MHz, CDCl3): δ 143.82, 133.12, 130.19, 118.84, 117.44, 115.37. MS (GC-MS): 162(M+)

3-nitrobenzenamine (2k)

1H NMR (400 MHz, CDCl3): δ 7.64–7.53 (m, 1H), 7.53–7.46 (m, 1H), 7.36–7.20 (m, 1H), 6.96 (ddd, J = 8.0, 2.3, 0.8 Hz, 1H), 4.03 (s, 2H). 13C NMR (101 MHz, CDCl3): δ 149.24, 147.48, 129.91, 120.64, 113.11, 109.01. MS (GC-MS): 138(M+)

References

  1. Clark JH: Green chemistry: challenges and opportunities. Green Chem. 1999, 1: 1-8. 10.1039/a807961g.

    Article  CAS  Google Scholar 

  2. Li CJ, Anastas PT: Green Chemistry: present and future. Chem Soc Rev. 2012, 41: 1413-1414. 10.1039/c1cs90064a.

    Article  Google Scholar 

  3. Appukkuttan P, Mehtaa VP, Van der Eycken EV: Microwave-assisted cycloaddition reactions. Chem Soc Rev. 2010, 39: 1467-1477. 10.1039/b815717k.

    Article  CAS  Google Scholar 

  4. Kappe CO, Van der Eycken EV: Click chemistry under non-classical reaction conditions. Chem Soc Rev. 2010, 39: 1280-1290. 10.1039/b901973c.

    Article  CAS  Google Scholar 

  5. Cracotto G, Cintas P: Power ultrasound in organic synthesis: moving cavitational chemistry from academia to innovative and large-scale applications. Chem Soc Rev. 2006, 35: 180-196. 10.1039/b503848k.

    Article  Google Scholar 

  6. Polshettiwar V, Varma RS: Microwave-Assisted Organic Synthesis and Transformations using Benign Reaction Media. Acc Chem Res. 2008, 41: 629-639. 10.1021/ar700238s.

    Article  CAS  Google Scholar 

  7. Tafesh AM, Weiguny J: A Review of the Selective Catalytic Reduction of Aromatic Nitro Compounds into Aromatic Amines, Isocyanates, Carbamates, and Ureas Using CO. Chem Rev. 1996, 96: 2035-2052. 10.1021/cr950083f.

    Article  CAS  Google Scholar 

  8. Li F, Cui JN, Qian XH, Zhang R, Xiao Y: Highly chemoselective reduction of aromatic nitro compounds to the corresponding hydroxylamines catalysed by plant cells from a grape. Chem Commun. 2005, 43: 1901-1903.

    Article  Google Scholar 

  9. He DP, Shi H, Wu Y, Xu BX: Synthesis of chloroanilines: selective hydrogenation of the nitro in chloronitrobenzenes over zirconia-supported gold catalyst. Green Chem. 2007, 9: 849-951. 10.1039/b618367k.

    Article  CAS  Google Scholar 

  10. Liang M, Wang X, Liu H, Wang J: Excellent catalytic properties over nanocomposite catalysts for selective hydrogenation of halonitrobenzenes. J Catal. 2008, 255: 335-342. 10.1016/j.jcat.2008.02.025.

    Article  CAS  Google Scholar 

  11. Chandrasekhar S, Prakash SJ, Rao CL: Poly(ethylene Glycol) (400) as Superior Solvent Medium against Ionic Liquids for Catalytic Hydrogenations with PtO2. J Org Chem. 2006, 71: 2196-2199. 10.1021/jo052604x.

    Article  CAS  Google Scholar 

  12. Shi Q, Lu R, Lu L, Fu X, Zhao D: Efficient Reduction of Nitroarenes over Nickel-Iron Mixed Oxide Catalyst Prepared from a Nickel-Iron Hydrotalcite Precursor. Adv Synth Catal. 2007, 349: 1877-1881. 10.1002/adsc.200700070.

    Article  CAS  Google Scholar 

  13. Mandal PK, McMurray JS: Pd − C-Induced Catalytic Transfer Hydrogenation with Triethylsilane. J Org Chem. 2007, 72: 6599-6601. 10.1021/jo0706123.

    Article  CAS  Google Scholar 

  14. Rahaim RJ, Maleczka REJ: Pd-Catalyzed Silicon Hydride Reductions of Aromatic and Aliphatic Nitro Groups. Org Lett. 2005, 7: 5087-5090. 10.1021/ol052120n.

    Article  CAS  Google Scholar 

  15. Wienhöfer G, Sorribes I, Boddien A, Westerhaus F, Junge K, Junge H, Llusar R, Beller M: General and Selective Iron-Catalyzed Transfer Hydrogenation of Nitroarenes without Base. J Am Chem Soc. 2011, 133: 12875-12879. 10.1021/ja2061038.

    Article  Google Scholar 

  16. Sharma U, Kumar P, Kumar N, Kumar V, Singh B: Highly Chemo- and Regioselective Reduction of Aromatic Nitro Compounds Catalyzed by Recyclable Copper(II) as well as Cobalt(II) Phthalocyanines. Adv Synth Catal. 2010, 352: 1834-1840. 10.1002/adsc.201000191.

    Article  CAS  Google Scholar 

  17. Song XY, Sun SX, Zhang WM, Yin ZL: A method for the synthesis of spherical copper nanoparticles in the organic phase. J Colloid Interface Sci. 2004, 273: 463-469. 10.1016/j.jcis.2004.01.019.

    Article  CAS  Google Scholar 

  18. Mitudome T, Arita S, Mori H, Mizugaki T, Jitsukawa K, Kaneda K: Supported Silver-Nanoparticle-Catalyzed Highly Efficient Aqueous Oxidation of Phenylsilanes to Silanols. Angew Chem Int Ed. 2008, 47: 7938-7940. 10.1002/anie.200802761.

    Article  Google Scholar 

  19. Min KI, Choi JS, Chung YM, Ahn WS, Ryoo R, Lim PK: p-Aminophenol synthesis in an organic/aqueous system using Pt supported on mesoporous carbons. Appl Catal A Gen. 2008, 337: 97-140. 10.1016/j.apcata.2007.12.004.

    Article  CAS  Google Scholar 

  20. Takasaki M, Motoyama Y, Higashi K, Yoon SH, Mochida I, Nagashima H: Chemoselective Hydrogenation of Nitroarenes with Carbon Nanofiber-Supported Platinum and Palladium Nanoparticles. Org Lett. 2008, 10: 1601-1604. 10.1021/ol800277a.

    Article  CAS  Google Scholar 

  21. Wang F, Liu JH, Xu XL: Layered material γ-ZrP supported platinum catalyst for liquid-phase reaction: a highly active and selective catalyst for hydrogenation of the nitro group in para-chloronitrobenzene. Chem Commun. 2008, 46: 2040-2042.

    Article  Google Scholar 

  22. Motoyamal Y, Lee YJ, Tsuji K, Yoon SH, Mochida I, Nagashima H: Platinum Nanoparticles Supported on Nitrogen-doped Carbon Nanofibers as Efficient Poisoning Catalysts for the Hydrogenation of Nitroarenes. ChemCatChem. 2011, 3: 1578-1581. 10.1002/cctc.201100135.

    Article  Google Scholar 

  23. Liu MH, Yu WY, Liu HF: Selective hydrogenation of o-chloronitrobenzene over polymer-stabilized ruthenium colloidal catalysts. J Mol Catal A Chem. 1999, 138: 295-303. 10.1016/S1381-1169(98)00159-9.

    Article  CAS  Google Scholar 

  24. Boronat P, Concepción A, Corma S, González F, Serna IP: A Molecular Mechanism for the Chemoselective Hydrogenation of Substituted Nitroaromatics with Nanoparticles of Gold on TiO2 Catalysts: A Cooperative Effect between Gold and the Support. J Am Chem Soc. 2007, 129: 16230-16237. 10.1021/ja076721g.

    Article  CAS  Google Scholar 

  25. Lou XB, He L, Qian Y, Liu YM, Cao Y, Fan KN: Highly Chemo- and Regioselective Transfer Reduction of Aromatic Nitro Compounds using Ammonium Formate Catalyzed by Supported Gold Nanoparticles. Adv Synth Catal. 2011, 353: 281-286. 10.1002/adsc.201000621.

    Article  CAS  Google Scholar 

  26. Corma A, Serna P: Chemoselective Hydrogenation of Nitro Compounds with Supported Gold Catalysts. Science. 2006, 313: 332-334. 10.1126/science.1128383.

    Article  CAS  Google Scholar 

  27. Luo PF, Xu KL, Zhang R, Huang L, Wang J, Xing WH, Huang J: Highly efficient and selective reduction of nitroarenes with hydrazine over supported rhodium nanoparticles. Catal Sci Technol. 2012, 2: 301-304. 10.1039/c1cy00358e.

    Article  CAS  Google Scholar 

  28. Pradhan N, Pal A, Pal T: Catalytic Reduction of Aromatic Nitro Compounds by Coinage Metal Nanoparticles. Langmuir. 2001, 17: 1800-1802. 10.1021/la000862d.

    Article  CAS  Google Scholar 

  29. Wen HL, Yao KS, Zhang YD, Zhou ZM, Kirschning A: Catalytic transfer hydrogenation of aromatic nitro compounds in presence of polymer-supported nano-amorphous Ni–B catalyst. Catal Commun. 2009, 10: 1207-1211. 10.1016/j.catcom.2009.01.030.

    Article  CAS  Google Scholar 

  30. Ranu BC, Saha A, Jana R: Microwave-Assisted Simple and Efficient Ligand Free Copper Nanoparticle Catalyzed Aryl-Sulfur Bond Formation. Adv Synth Catal. 2007, 349: 2690-2696. 10.1002/adsc.200700289.

    Article  CAS  Google Scholar 

  31. Bhadra S, Saha A, Ranu BC: One-pot copper nanoparticle-catalyzed synthesis of S-aryl- and S-vinyl dithiocarbamates in water: high diastereoselectivity achieved for vinyl dithiocarbamates. Green Chem. 2008, 10: 1224-1230. 10.1039/b809200a.

    Article  CAS  Google Scholar 

  32. Kidwai M, Bansal V, Saxena A, Aerry S, Mozumdar S: Cu-Nanoparticles: efficient catalysts for the oxidative cyclization of Schiffs’ bases. Tetrahedron Lett. 2006, 47: 8049-8053. 10.1016/j.tetlet.2006.09.066.

    Article  CAS  Google Scholar 

  33. Singh P, Katyal A, Kalra R, Chandra R: Copper nanoparticles in an ionic liquid: an efficient catalyst for the synthesis of bis-(4-hydroxy-2-oxothiazolyl)methanes. Tetrahedron Lett. 2008, 49: 727-730. 10.1016/j.tetlet.2007.11.106.

    Article  CAS  Google Scholar 

  34. Ahammed S, Saha A, Ranu BC: Hydrogenation of Azides over Copper Nanoparticle Surface Using Ammonium Formate in Water. J Org Chem. 2011, 76: 7235-7239. 10.1021/jo200915h.

    Article  CAS  Google Scholar 

  35. Saha A, Ranu BC: Highly Chemoselective Reduction of Aromatic Nitro Compounds by Copper Nanoparticles/Ammonium Formate. J Org Chem. 2008, 73: 6867-6870. 10.1021/jo800863m.

    Article  CAS  Google Scholar 

  36. Peng YQ, Song GH: Simultaneous microwave and ultrasound irradiation: A rapid synthesis of hydrazides. Green Chem. 2001, 3: 302-304. 10.1039/b108878p.

    Article  CAS  Google Scholar 

  37. Peng YQ, Dou RL, Song GH: Surface cleaning under combined microwave and ultrasound irradiation: flash synthesis of 4H-pyrano[2,3-c]pyrazoles in aqueous media. Green Chem. 2006, 8: 573-575. 10.1039/b601209d.

    Article  CAS  Google Scholar 

  38. Feng HD, Li Y, Van der Eycken EV, Peng YQ, Song GH: Synthesis of polysubstituted pyridines under combined microwave and ultrasound irradiation: K2CO3-promoted tandem addition/cyclization/hydrogen shift process. Tetrahedron Lett. 2012, 53: 1160-1162. 10.1016/j.tetlet.2011.12.103.

    Article  CAS  Google Scholar 

  39. Feng HD, Lin SJ, Wang JY, Song GH, Peng YQ: Aqueous heterogeneous synthesis of polysubstituted 2,6-dicyanoanilines via combined microwave and ultrasound-assisted multicomponent reaction. Green Process Synth. 2012, 1: 463-468.

    CAS  Google Scholar 

  40. Feng HD, Ying XL, Peng YQ, Van der Eycken EV, Liu CD, Zhao SS, Song GH: FeCl3- promoted synthesis of 1, 3, 4-thiadiazoles under combined microwave and ultrasound irradiation in water. Monatsh Chem. 2013, 144: 681-686. 10.1007/s00706-012-0846-x.

    Article  CAS  Google Scholar 

  41. Zhu HT, Zhang CY, Yin YS: Novel synthesis of copper nanoparticles: influence of the synthesis conditions on the particle size. Nanotechnology. 2005, 16: 3079-3083. 10.1088/0957-4484/16/12/059.

    Article  CAS  Google Scholar 

  42. Zhu HT, Zhang CY, Yin YS: Rapid synthesis of copper nanoparticles by sodium hypophosphite reduction in ethylene glycol under microwave irradiation. J Crystal Growth. 2004, 270: 722-728. 10.1016/j.jcrysgro.2004.07.008.

    Article  CAS  Google Scholar 

  43. Park BK, Jeong S, Kim D, Moon J, Lim S, Kim JS: Synthesis and size control of monodisperse copper nanoparticles by polyol method. J Colloid Interface Sci. 2007, 311: 417-424. 10.1016/j.jcis.2007.03.039.

    Article  CAS  Google Scholar 

  44. Jin ZH, Wang XY, Wang ST, Li D, Lu GZ: The effect of triethylamine on the hydrodechlorination of chlorophenols on Pd/C at low temperature. Catal Commun. 2009, 10: 2027-2030. 10.1016/j.catcom.2009.07.024.

    Article  CAS  Google Scholar 

  45. Corma A, Concepcin P, Serna P: A different reaction pathway for the reduction of aromatic nitro compounds on gold catalysts. Angew Chem Int Ed. 2007, 46: 7266-7269. 10.1002/anie.200700823.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

Financial support for this work from the National Basic Research Program of China (973 Program) (Grant 2010CB126101) and the Shanghai Leading Academic Discipline Project (Project Number: B507) are gratefully acknowledged.

Author information

Authors and Affiliations

  1. Shanghai Key Laboratory of Chemical Biology, East China University of Science and Technology, 130 Meilong Road, Shanghai, 200237, P. R. China

    Huangdi Feng, Yuan Li, Shengji Lin & Gonghua Song

  2. Department of Chemistry, Laboratory for Organic & Microwave-Assisted Chemistry (LOMAC), Katholieke Universiteit Leuven, Celestijnenlaan 200F, B-3001, Leuven, Belgium

    Huangdi Feng & Erik V Van der Eycken

  3. College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, 333 Longteng Road, Shanghai, 201620, P. R. China

    Huangdi Feng

Authors
  1. Huangdi Feng
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yuan Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shengji Lin
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Erik V Van der Eycken
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Gonghua Song
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Gonghua Song.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

HDF and GHS designed the research with HDF and YL performing the experiments; HDF and SJL analyzed the data; HDF, EVDE and GHS wrote the paper, and all authors read and approved the final manuscript.

Authors’ original submitted files for images

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Feng, H., Li, Y., Lin, S. et al. Nano Cu-catalyzed efficient and selective reduction of nitroarenes under combined microwave and ultrasound irradiation. Sustain Chem Process 2, 14 (2014). https://doi.org/10.1186/2043-7129-2-14

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/2043-7129-2-14

Keywords